RODER Electronics - Ultrasonic thickness

TI-007 Precision Ultrasonic Wall Thickness Gauge
Measuring Range : 0.15 - 25.4 mm

TI007

The TI-007 is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminium housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The gauges have a MEASURING RANGE from 0.15 to 25.40 mm.
Using a single element delay tip transducer, the gauges will measure thin materials and automatically switch to interface echo mode when measuring thicker material and plastics.

FEATURES

Large, backlight LCD Display retains last readings
Resolution of 0.001 mm
Selectable units of inch or mm
Model with Graphite Tip probe for plastics

TYPICAL APPLICATIONS

ocean vessels
storage tanks
sheet stock
steel structures
parts inspection
piping systems

COMPLETE KIT

The TI-007 is supplied as a complete kit with the gauge, probe, 4 oz bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. kit

ACCESSORIES

Steel_test_block

Steel Test Block

Precision Machined and Finished
Includes NIST Report and Test Data
Wooden Storage Box optional

protective_holder

Protective holder

Constructed from heavy duty
Cordura Nylon
Built-in belt loop
Includes wrist and shoulder straps

cf_12

CF 12

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

calibration_certificate

Wall Thickness Calibration Certificate

DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1

MEASURING LIMITS

minimum radius for convex surfaces 12.7 mm
minimum radius for concave surfaces 63.5 mm
minimum headroom 33.0 mm
minimum sample diameter 12.7 mm

Single-Element Contact type probe can be fitted with a varierety of delay line tips, depending upon the application:

standard, small for very thin materials
standard, tall for thicker materials
conical, when smallest contact area is required
graphite for plastic

Specifications
RANGE	0.15 - 25.40 mm
RESOLUTION	0.001 mm
DISPLAY	4,5 -Digit, o.5" Backlight LCD
VELOCITY RANGE	6,500-33,000 ft./sec (1250-10000 m/sec)
PROBE WEARFACE	PEEK (Polyethlethylketone)
CABLE	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
TEMP. LIMITS	da - 30°C a 50°C
BATTERY TYPE	2 AA batteries
BATTERY LIFE	150 hours
WEIGHT	283 g / 10 ounces
DIMENSIONS	2.5 x 4.5 x 1.25 inches
GAUGE WARRANTY	5 years
PROBE WARRANTY	90 days